home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 11 / Cream of the Crop 11-1.iso / image / tp30sb2.zip / TPDB.DLL / string.txt < prev   
Text File  |  1995-11-30  |  12KB  |  302 lines

  1. 2     key value already exists 
  2. 3     could not delete since pntr's don't match 
  3. 4     could not find key to delete 
  4. 5     cannot call delete w/o verification with duplicate keys 
  5. 6     ctree(...) jump table error 
  6. 7     terminate user 
  7. 10     INTREE parameters require too much space 
  8. 11     bad INTREE parameters 
  9. 12     could not open file: not there or locked 
  10. 13     unknown file type 
  11. 14     file corrupt at open 
  12. 15     file has been compacted 
  13. 16     could not create index file 
  14. 17     could not create data file 
  15. 18     tried to create existing index file 
  16. 19     tried to create existing data file 
  17. 20     key length too large for node size 
  18. 21     record length too small 
  19. 22     file number out of range 
  20. 23     illegal index member info 
  21. 24     could not close file 
  22. 25     bad link in deleted node list. REBUILD 
  23. 26     file number not active 
  24. 27     drn before beginning of data records 
  25. 28     zero drn in ADDKEY 
  26. 29     zero drn in data file routine 
  27. 30     drn exceeds logical end of file 
  28. 31     flag not set on record in delete chain 
  29. 32     attempt to delete record twice in a row 
  30. 33     attempt to use NULL ptr in read/write 
  31. 34     predecessor repeat attempts exhausted 
  32. 35     seek error:  check sysiocod value  
  33. 36     read error:  check sysiocod error  
  34. 37     write error: check sysiocod error 
  35. 38     could not convert virtual open to actual 
  36. 39     no more records availble 
  37. 40     index node size too large 
  38. 41     could not unlock data record 
  39. 42     could not obtain data record lock 
  40. 43     version incompatibility 
  41. 44     data file serial number overflow 
  42. 45     key length exceeds MAXLEN parameter 
  43. 46     file number already in use. 
  44. 47     c-tree has not been initialized      
  45. 48     operation incompatible with type of file 
  46. 49     could not save file  
  47. 50     could not lock node 
  48. 51     could not unlock node 
  49. 52     variable length keys disabled OR invalid key type 
  50. 53     file mode inconsistent with c-tree config  
  51. 54     attempt to write a read only file 
  52. 55     file deletion failed  
  53. 56     file must be opened exclusive for delete   
  54. 57     proper lock is not held (CHECKLOCK/READ)   
  55. 58     LOADKEY called with incorrect key number. You cannot continue.
  56. 59     LOADKEY called with key out of order. You may skip this key & continue. 
  57. 60     percent out of range 
  58. 61     NULL fcb detected during I/O 
  59. 62     File must be opened exclusively 
  60. 63     start file / log file serial number error  
  61. 64     file name too long in log file 
  62. 65     not enough memory during tran processing 
  63. 66     log file entry failed to find checkpoint 
  64. 67     could not rename file
  65. 68     could not allocate memory for control list 
  66. 69     node does not belong to index 
  67. 70     transaction already pending 
  68. 71     no active transaction 
  69. 72     no space for shadow buffer 
  70. 73     LOGFIL encountered during shadow only 
  71. 74     recovery: two active tran for user 
  72. 75     recovery: bad tran owner 
  73. 76     recovery: bad tran type 
  74. 77     recovery: file name too long 
  75. 78     transaction abandoned: too many log extents or dynamic dump wait exhausted
  76. 79     could not log file opn/cre/cls/del 
  77. 80     NULL target or bad keyno 
  78. 81     transaction allocation error 
  79. 82     user allocation error 
  80. 83     isam allocation error 
  81. 84     maximum users exceeded 
  82. 85     reduce lock to read lock after update 
  83. 86     dead lock detected 
  84. 87     system not quiet: files in use 
  85. 88     linked list memory allocation error 
  86. 89     memory allocation during tran processing 
  87. 90     could not create queue 
  88. 91     queue write error 
  89. 92     queue memory error during write 
  90. 93     queue read error 
  91. 94     pending error: cannot save or commit tran 
  92. 95     could not start task 
  93. 96     start-file/log open error 
  94. 97     bad user handle 
  95. 98     bad transaction mode 
  96. 99     transaction type / filmod conflict 
  97. 100     no current record for isam datno  
  98. 101     could not find isam keyno request 
  99. 102     could not open ISAM parameter file 
  100. 103     could not read first 5 parameters in ISAM parameter file 
  101. 104     too many files in ISAM parameter file 
  102. 105     could noy undo ISAM update. Rebuild Files 
  103. 106     could not read data file record in ISAM parameter file 
  104. 107     too many keys for data file in ISAM parameter file 
  105. 108     incorrect keyno for index member in parameter file 
  106. 109     too many key segments defined in ISAM parameter file 
  107. 110     could not read segment record in ISAM parameter file 
  108. 111     could not read index file record in ISAM parameter file 
  109. 112     LKISAM(ENABLE) found pending locks 
  110. 113     no memory for user lock table 
  111. 114     1st byte of data record equals delete flag or bad variable length record mark 
  112. 115     key segments do not match key length 
  113. 116     bad mode parameter
  114. 117     could not read index member record 
  115. 118     NXTSET called before FRSSET for keyno 
  116. 119     FRSSET called for index with wrong keytyp 
  117. 120     data record length exceeds rebuild max  
  118. 121     not enough space for sort area.       
  119. 122     attempt to change fixed vs variable len 
  120. 123     var length header has bad record mark   
  121. 124     # of indices does not match (OPNIFIL)   
  122. 125     c-tree already initialized 
  123. 126     bad directory path get 
  124. 127     could not send request 
  125. 128     could not receive answer 
  126. 129     c-tree not initialized
  127. 130     null file name pointer in OPNFIL 
  128. 131     file name length exceeds msg size 
  129. 132     no room for application message buffer 
  130. 133     server is not active    
  131. 134     could not get servers message id 
  132. 135     could not allocate application id 
  133. 136     could not get application msg status
  134. 137     could not set message appl msg size 
  135. 138     could not get rid of application msg
  136. 139     badly formed file name 
  137. 140     variable record length too long 
  138. 141     required message size exceeds maximum
  139. 142     application MAXLEN > server's MAXLEN    
  140. 143     communications handler not installed    
  141. 144     application could not id output queue
  142. 145     could not find COMM software 
  143. 146     could not update free space info 
  144. 147     space to be reused is not marked deleted 
  145. 148     WRTVREC cannot fit record at recbyt 
  146. 149     varlen less than minimum in ADDVREC 
  147. 150     server is shutting down
  148. 151     could not shut down. transactions pending
  149. 152     could not extend logfile 
  150. 153     buffer too small 
  151. 154     zero length record in REDVREC 
  152. 155     native system failure 
  153. 158     REDVREC record not marked active 
  154. 159     zero recbyt value 
  155. 160     multi-user interefernce: index information updated by the time user got to actual data record. 
  156. 161     user appears inactive
  157. 162     server has gone away    
  158. 163     no more room in server lock table 
  159. 164     file number out of range
  160. 165     no file control block available 
  161. 166     no more ct file control blocks in server 
  162. 167     could not read request
  163. 168     could not send answer 
  164. 169     create file already opened (in recovery) 
  165. 170     bad function number 
  166. 171     application msg size exceeds server size 
  167. 172     could not allocate server msg buffer        
  168. 173     could not identify server 
  169. 174     could not get server message id 
  170. 175     server could not allocate user msg area  
  171. 176     could not get server msg status 
  172. 177     could not set message server msg size 
  173. 178     unexpected file# assigned to [si] in rcv 
  174. 179     server is at full user capacity
  175. 180     could not read symbolic key name    
  176. 181     could not get mem for key symb name 
  177. 182     no room for sort key. increase MAXFIL  
  178. 183     could not read file field number values
  179. 184     attempt to reallocate set space
  180. 185     not enough memory for multiple sets 
  181. 186     set number out of range
  182. 187     null buffer in rtread.c
  183. 188     null target buffer in rtread.c 
  184. 189     join_to skip    
  185. 190     join_to error
  186. 191     join_to null fill 
  187. 192     detail_for skip
  188. 193     detail_for error 
  189. 194     detail_for null fill 
  190. 195     could not get mem for dat symb name
  191. 196     exceeded RETRY_LIMIT in RTREAD.C    
  192. 197     could net get memory for ifil block
  193. 198     improper ifil block
  194. 199     schema not defined for data file    
  195. 370     sort base: errors SORT_ERR + 101 thru 126
  196. 400     resource already enabled
  197. 401     resources not enabled
  198. 402     file must be exclusive to enable res
  199. 403     empty resource id
  200. 404     output buffer to small
  201. 405     resource id already added
  202. 406     bad resource search mode
  203. 407     attempt to get non-resource info
  204. 408     resource not found    
  205. 409     not in use: available
  206. 410     user not active
  207. 411     not a superfile
  208. 412     WRL to WXL commit promote pending(CIL)   
  209. 413     superfile host not opened
  210. 414     cannot nest superfiles
  211. 415     illegal ADDKEY to superfile
  212. 416     illegal DELBLD to superfile
  213. 417     cache page size error 
  214. 418     max name inconsistency 
  215. 419     host superfile does not support recovery 
  216. 420     key update with pending transaction 
  217. 421     filter not supported yet
  218. 422     other functions not sup 
  219. 423     incomplete    
  220. 424     add list err    
  221. 425     batch in progress
  222. 426     no batch active    
  223. 427     status info already returned    
  224. 428     no more info, batch cancelled
  225. 429     bufsiz too small for record    
  226. 430     request is empty or inconsistent 
  227. 431     aggregate/serialization lock denied 
  228. 432     fixed length string requires len in DODA 
  229. 433     segment def inconsistent with schema 
  230. 434     very long def block not supported
  231. 435     file def memory error
  232. 436     bad def number
  233. 437     defptr NULL during GETDEFBLK    
  234. 438     requested def blk is empty    
  235. 439     no conversion routine for Def'n Block 
  236. 440     dynamic dump already in progress    
  237. 441     no memory for dynamic dump file buffer 
  238. 442     one or more files not available for dump 
  239. 443     file length discrepancy
  240. 444     could not create file during dump rcv 
  241. 445     not enough data to assemble key value
  242. 446     bad key segment mode
  243. 447     only the file's owner can perform op
  244. 448     permission to set file definition denied 
  245. 449     ADMIN has opened file. Cannot delete file
  246. 450     invalid user id
  247. 451     invalid password 
  248. 452     server could not process user/acct info  
  249. 453     no such server 
  250. 455     user does not belong to group 
  251. 456     group access denied
  252. 457     file password invalid 
  253. 458     write permission not granted    
  254. 459     file delete permission denied
  255. 460     resource not enabled
  256. 461     bad permission flag 
  257. 462     no directory found in superfile
  258. 463     file id uniqueness error 
  259. 464     ISAM level logon not performed
  260. 465     Incremental Index: dnumidx < 1
  261. 466     Incremental Index: dfilno not a ISAM file
  262. 467     Incremental Index: aidxnam NULL for 1st  
  263. 468     Incremental Index: active tran not allowed
  264. 469     negative I/O request 
  265. 499     mismatch between recv log & file id 
  266. 500     server could not init SQL engine 
  267. 501     could not init SQL for a user 
  268. 502     could not access SQL master info 
  269. 503     could not continue SQL request 
  270. 504     server does not support SQL 
  271. 505     user profile does not enable SQL 
  272. 506     could open save-restore file 
  273. 507     could not process save-restore file 
  274. 508     save restore inconsistency 
  275. 509     duplicate server 
  276. 510     active chkpnt at start of roll-forward 
  277. 8001    Error adding volume (serial=%08x, label=%s, net=%s)
  278. 8002    Error adding record for path '%s' on volume #%d
  279. 8003    Unable to update thumbnail record
  280. 8004    Unable to add thumbnail record
  281. 8005    Unable to retrieve volume information for drive %s
  282. 8006    Unable to initialize database
  283. 8007    Unable to open database table (%s)
  284. 8008    Unable to allocate memory
  285. 8009    Invalid paramter in database function call
  286. 8010    Unable to create file
  287. 8011    Output of table file number entrries
  288. 8012    Unable to initialize resources in thumbnail database
  289. 8013    Invalid dbinfo paramter in call
  290. 8014    Unable to open file "%s"
  291. 8015    Unable to create database table (%s)
  292. 8016    Invalid database handle
  293. 8017    Unable to update thumbnail record
  294. 8018    Unable to add thumbnail record
  295. 8019    Internal error: Invalid parameter passed to routine '%s'
  296. 8020    Unable to read thumbnail record
  297. 8021    Unable to initialize %s for rebuilding (must be able to open the database exclusively)
  298. 8022    Unable to rebuild table '%s'
  299. 8023    Unable to add record for keyword '%s'
  300. 8024    Unable to add keyword reference (%d, %d)
  301. 8025    Unable to delete keyword reference (%d,%d)
  302.